Polyurethane guide roller used on Interroll conveyor systems to control side-to-side movement at merges, curves, and transfer points. The PU surface provides a quieter, non-marring contact compared to hard rollers, helping reduce scuffing on cartons and totes. The internal metal sleeve supports consistent fit on a shaft or shoulder bolt. Replace by matching OD, face width, and bore size to maintain lane geometry and tracking.
Dimensions / attributes
Outside diameter (OD): 2.00 in
Roller width: 3.00 in
Material: Polyurethane (PU), blue
Bore: 1/2 in ID metal sleeve
Mounting: Slip-fit on shaft/shoulder bolt
Typical location: Side guide position, merges, curves, transfer guidance points





